HARMOVANT
AUDIO ROUTER FOR MAC

AudiFlux. Every signal, exactly where it needs to go.

AudiFlux connects apps, audio interfaces and the network on your Mac. Create virtual devices with up to 128 channels, patch with one click on a grid and send audio over AES67 to the rest of your system.

See pricing
LAUNCH OFFER · US$ 99.00 US$ 59.90 · permanent license · 2 Macs per license · macOS
SOURCES →DESTINATIONS ↓MIX12345678REC12345678NET12345678PA1234STREAM1234REC123456
128 × 128channels per virtual device
16virtual devices at once
AES67audio over the network
2 Macsper permanent license
FEATURES

A patch bay for the whole Mac.

Virtual devices up to 128 channels

Create up to 16 virtual audio devices with 2, 4, 8, 16, 32, 64 or 128 channels. Every app on the Mac sees them as normal interfaces.

One click to patch

Sources in columns, destinations in rows. Click a crossing to connect, drag to patch a whole block, or connect 1:1 in one go. One source can feed many destinations.

Audio over the network (AES67)

Send and receive AES67 streams with PTP clock sync. Compatible devices and streams on the audio network show up on their own.

Your interfaces, in sync

Route to and from the audio interfaces connected to the Mac. Each one keeps its own clock and AudiFlux corrects the drift, with no clicks.

Names everywhere

Rename devices and channels once. The names show up in your recording, mixing and streaming apps.

Presets for every setup

Save the whole routing, with devices and names, as a preset. Switch from rehearsal to show, or from one venue to the next, in seconds.

AES67

Dante® networks via AES67

AudiFlux works on Dante® networks through the AES67 standard. Dante devices with AES67 mode turned on show up by name; AudiFlux receives their AES67 multicast streams and sends AES67 streams that they can subscribe to.

Dante side: AES67 mode enabled, 48 kHz, multicast, PTPv2 clock, 1 ms packet time, up to 8 channels per stream. Native Dante without AES67 is a proprietary protocol and is not supported.

BUILT FOR SHOWS

Runs in the background. Never drops the show.

Works with the app closed

The routing engine starts with the Mac and keeps running even when the AudiFlux window is closed.

One device fails, the rest keeps playing

Each device is isolated. If an interface is unplugged, only its routes go silent, and it comes back on its own with the patch intact.

A separate network for audio

Choose which network port carries the audio, so the internet and the audio network never mix.

Everything saved, always

Routes, names, devices and settings are saved automatically. Restart the Mac and everything is back where it was.

USES

One router, many jobs.

Record the show

Send every channel of your live console to a recording app on the same Mac, with the names already in place.

Virtual soundcheck

Play the recording back into the console inputs and tune the PA without the band on stage.

Broadcast and streaming

Build a separate mix for the stream and send it to the streaming app without touching the PA mix.

Audio network

Connect the Mac to stage boxes, consoles and other computers on an AES67 network with a single cable.

Works great with Live Rack: AudiFlux devices appear in Live Rack like any audio interface. Live Rack →

HOW IT WORKS

Up and running in three steps.

  1. 1

    Install and activate

    Download AudiFlux, install it and sign in with your Harmovant account. The trial gives you every feature for 14 days.

  2. 2

    Add your devices

    Create virtual devices with the channel count you need and add your interfaces and network streams to the grid.

  3. 3

    Patch and save

    Click to connect sources to destinations, name the channels and save the setup as a preset.

REQUIREMENTS

What you need

MacApple Silicon or Intel · macOS 12 or later
Network audioWired network port (a dedicated port for audio is recommended) and AES67-compatible devices, including Dante® devices with AES67 mode enabled
AccountHarmovant account and internet to activate. After that it works offline.
PRICING

Buy once. Keep it forever.

PERMANENT LICENSE LAUNCH OFFER
was US$ 99.00US$ 59.90one-time, per license
  • Every feature, no subscription
  • 2 Macs at the same time per license
  • 1 year of updates included
  • After that, keep your version forever or add another year of updates for US$ 9.90
  • Buy as many licenses as you need with the same account

14-day free trial with a card. Cancel before the end and you pay nothing; otherwise the license is charged once.

Already have AudiFlux? Buy more licenses or renew updates in My account.

FAQ

Frequently asked questions

How does the free trial work?

You enter a card and use AudiFlux with every feature for 14 days. Cancel in My account before the end and nothing is charged. If you keep it, the license is charged once and is yours.

What happens after the first year?

Nothing stops working. You keep every version released during your year of updates. If you want the newer versions, renew updates for US$ 9.90 per license for another year.

Can I use it on two Macs?

Yes. Each license works on 2 Macs at the same time. Signing in on a third Mac frees the one used longest ago, automatically.

Which network devices does it work with?

With devices and software that support the AES67 open standard, using PTP for clock. Many consoles, stage boxes and interfaces offer an AES67 mode.

Does it work with Dante®?

Yes, through AES67. Turn on AES67 mode on the Dante devices (48 kHz, multicast, PTPv2). AudiFlux then receives their streams and sends streams that the Dante receivers can subscribe to. Native Dante without AES67 is proprietary and not supported.

Does it work offline?

Yes. You need internet only to activate. After that AudiFlux works offline, and the license never cuts the audio.

Does it work on Windows?

Not for now. AudiFlux is made for macOS.

Put every signal in its place.

14 days with every feature. Then US$ 59.90 once, yours forever.

Dante is a trademark of Audinate Pty Ltd. AudiFlux is not affiliated with or endorsed by Audinate; compatibility is through the open AES67 standard.